D
ifferential
Cover
Angled for a tight fit and structural
rigidity, the Differential Skid Plate fits
both high and standard pinion covers to
give full protective coverage. Since it is a
closed system, it slides over objects and
won´t snag or hang up. Made from 5 mm
steel.
Part-Nr.: Dana 30: 1-65443 (black)
Part-Nr.: Dana 30: 1-65444 (stainless
steel)
Part-Nr.: Dana 35: 1-65445 (black)
Part-Nr.: Dana 35: 1-65446(stainlesssteel)
Part-Nr.: Dana 44: 1-65447 (black)
Part-Nr.: Dana 44: 1-65448(stainlesssteel)
S
teering Box Skid Plate
The full enclosure skid plate has been
designed to fit within 1/4” of the steering
box for maximum ground clearance
over those big rocks. It also means full
structural rigidity so when the rocks hit
come, there´s minimal deflection. It also
has drain holes to clear debris without
sacrificing structural support. Made from
3/16”
steel and black powder coated.
Steering Box Skid Plate for Wrangler TJ.
Part-Nr.: TJ 1-64250
Part-Nr.: YJ 1-64650
R
ock Crawler
Fuel Tank Skid Plate
Put some thick, 3/16” steel between your
gas tank and rough terrain your Jeep will
conquer. The WARN Fuel Tank Skid Plate
for the Jeep Wrangler not only adds an
extra inch of clearance over stock setup,
it bolts right onto the body using the
existing factory attachment points. Drain
holes help to keep the plate free of debris.
Durable, black powder coat finish fights
off rust.
Part-Nr.: TJ 1-67820
Part-Nr.: YJ 1-66550
R
ock Crawler Front
Bumper
There’s only one reason to introduce another
bumper to the world of Jeep® vehicles.
Because the Warn bumper incorporates
our off-road experience to deliver a tough,
durable well thought out product. Let’s
start with the tapered ends for increased
approach angles. The front bumpers have
welded eyelets to mount D-shackles and
predrilled holes to mount lights. Available
for Jeep brand CJs, YJs and TJs, the Warn
bumpers are laser cut from 3/16” steel, then
CNC formed, robotic-welded for precise fit
and powder-coated for durability.
Part-Nr.: TJ 1-61853, Part-Nr.: YJ
1-61855,
Part-Nr.: CJ 1-61859
Part-Nr.: JK 1-74255
R
ock Crawler
Rear Bumper + Tyre Carrier
This tough, durable bumper gives maximum
off-road
performance.
Tapered
ends
allow for increased approach angles. An
integrated 2” receiver allows mounting of
your portable winch or shackle bracket to
increase your recovery options. Available
for Jeep CJs, YJs and TJs, the Warn bumper
is laser cut from 3/16” steel, then CNC
formed, robotic welded for precise fit and
powder-coated for durability.
Rear Bumper: Part-Nr.: CJ 1-62947, Part-
Nr.: YJ 1-65509, Part-Nr.: TJ 1-65508,
Part-Nr.: JK 1-74300, Part-Nr.: XJ on
request
Tyres Carrier: Part-Nr.: YJ /TJ 1-64337,
Part-Nr.: JK 1-74299, Part-Nr.: CJ 1-63253
R
ock Sliders
How many body shots can your Jeep
absorb?
A heck of a lot more with Warn’s new Rock
Sliders. The thick 3/16” reinforced steel
plate bolts right to the Jeep body, reinforcing
its weakest spot. Black powder coat finish.
Mounting hardware is included. Some
drilling required.
Rear Bumper: Part-Nr.: CJ 1-62947, Part-
Nr.: YJ 1-65509, Part-Nr.: TJ 1-65508, Part-
Nr.: JK 1-74300, Part-Nr.: XJ on request
Tyres Carrier: Part-Nr.: YJ /TJ 1-64337,
Part-Nr.: JK 1-74299, Part-Nr.: CJ 1-63253
A
RB differential cover for
Dana axles and Land Rover
The ARB differential cover is manufactured
from an extremely robust cast iron that is
harder than steel. The cover protects the
differential and also the pinion and crown
gears particularly effectively in the event of
heavy ground contact, while at the same
time the flat shape provides good ground
clearance under the axles. In addition the
ARB cover, thanks to its computerised design,
increases the torsional stiffness of the overall
axle geometry by 1,300 Nm – as a result
the pinion and crown gears run without
any torsional stresses, thus increasing their
service lives. An integrated oil dipstick not
only allows checking of the oil level, but also
shows whether water has penetrated into
the differential. Finally magnets on the oil
drain plug and dipstick also capture metallic
particles and provide early warning of
incipient damage or increased wear.
Part-Nr.: 2-0750001 for DANA 60 and
Land Rover Salisbury axle
Part-Nr.: 2-0750002 for DANA 30
Part-Nr.: 2-0750003 for DANA 44
Part-Nr.: 2-0750004 for DANA35&35C
50
Jeep-Protection
